Without the use of natural gases, the world as we know it would be completely different. The average person uses natural gases multiple times a day without even realizing it. Even though it is so commonly used and depended on, not many people fully understand what natural gas is. There is a lot more to this specialty gas than many might think. Continue reading All About Natural Gas Use
The rate of natural gas usage in America is very high. 66.7 million homes are powered by natural gas in the U.S., which means that the production and transportation of gas is a major industry. Handling gas in any form requires special care, due to the fact that it is toxic and highly flammable. However, this is especially true when it comes to calibration gas cylinders. The gas in these cylinders is compressed and can have incredibly high internal pressure rates. This could lead to dangerous explosions if the cylinders are not handled properly.
Disposable calibration gas suppliers will generally have safety measures listed on their website, as well as on their supplies. However, it is still wise to educate yourself on proper storage and handling so that you avoid any mishaps. There are specific steps you should take to avoid explosions and injury.
Tips for Storing
Storing gas cylinders takes extra care and precautions. How and where you store them is very important. Your disposable calibration gas suppliers should be able to tell you the right specifications for their particular cylinders, but there are some general measures you can take. One of the most important things to do is keep your cylinders safely away from anything that could be combustible. The recommended distance is at least 20 feet. This also includes separating oxygen and gas cylinders, because fire needs oxygen to burn and the two being mixed could cause a massive fire that would be harder to get under control.
It also important to make sure that the cylinders are properly ventilated and secured. You don’t want to store them in an area that is condensed, like a locker, because it can cause gas build up if there is a leak. There needs to be somewhere for potential leaks to breathe. It is also recommended that you store them upright in a specialized cart and secure them with a strap or chain. This ensures that they are held steady and won’t be exposed to anything that can weaken their shell.
Tips for Handling
Calibration gas suppliers should also be able to provide you with information on handling their specific cylinders. However, most cylinders require similar procedures for safety. The main thing you want to do is handle them steadily and securely so that they are not regularly tipped or smacked against other surfaces. You can use secure carts for this to keep them steady. You should also wear protective gear such as safety glasses and gloves in case of an incident.
If you follow these tips as well as the instructions provided by your disposable calibration gas suppliers, you shouldn’t have any problems. Always proceed with extra caution and don’t be afraid to apply extra safety measures when handling or storing your cylinders.
Gas Calibration Standards
Since one quarter (25%) of all primary energy used in the United States is natural gas, it is important to understand proper gas calibration standards to preserve gas quality. There are five methods of gas calibration standards that we will discuss in this article, each of which is viable in its own situation (some of you might even be asking: what is calibration gas?).
Gas monitors are an extremely essential tool in many workplaces. Industries such as mining, manufacturing, laboratory research, oil and gas, and agriculture use gas monitors to read the levels of potentially harmful gasses and air pollutants in the work environment, and alert workers if levels are too high. But how do these monitors work?
Calibration gases are vital for ensuring gas detectors work quickly and efficiently to detect air pollutants. When you don’t have a monitor maintenance program in place and rely only on a bump test to check that the monitor is working, serious accidents can happen.
It’s important to remember how often a gas detector needs to be calibrated and that you’re using high-quality calibration gases for an effective test. With that in mind, here are a few facts that are vital to remember when maintaining your gas detectors. Continue reading Calibrating Your Gas Detectors? Remember These Safety Facts
Many people do not even know what calibration gas is. However, you, whether you are a chemist, a business safety manager, an industrial supervisor, a chemical engineer, or a laboratory technician, calibration gas is saving your life. Gas detectors of all kinds protect workers in factories, chemistry labs, and other types of manufacturing from threats that they wouldn’t otherwise know are threatening them. Gases of all kinds can work their way into the air via leaks, even undetectable ones, and not all gases have a smell added (As Natural gas and cyanide do, among others). Gases of all kinds are increasing in demand: around 66.7 million homes across the country are powered by natural gas, and ammonia gas is used in the creation of more than 500 million tons of nitrogen fertilizer every year, making it one of the most commonly produced chemicals in the entire world. Whether your industry is agriculture, medical research, manufacturing, or anything else, chances are you use gas in some part of your business.
Bump tests and calibrations are crucial factors in any gas detection program. But you also need to make sure you’re using good technique to consistently and accurately detect atmospheric hazards.
To have good technique, it’s necessary to understand gas detection and the limitations of your equipment. That said, consider the following five tips you can use for consistent and accurate gas detection.
- Use the filters recommended by the equipment manufacturer. Most meters will use a filter of some kind. This helps to keep out any dust or liquids, which could impair the internals of the meters. Without one, your meter is more likely to need a repair. Think of it as a smartphone without a security case. Use the filters recommended by the manufacturer and replace them regularly to keep your meter working.
- Test your meter pump. Not all meters have a pump, but if yours has one it’s a good idea to test it. Your meter can’t pull a sample if the pump is weak. To test the pump before using the monitor, place your finger over the inlet. The pump is good to go if the pump stall is triggered.
- Calibrate periodically. It’s vital that you’re calibrating periodically, although the timing for each calibration may vary depending on the recommendations of your manufacturers. Calibrations are quick and essential. They’re what ensures your gas meter reads are accurate when they’re exposed to gas. Without regular calibrations, you can’t be sure your meters are reading at all. Don’t trust a self-bump test, either.
- Do a bump test before every use. Speaking of bump tests, you want to be sure that you’re not just relying on fresh air values. If your meter sensor is damaged in some way or it no longer responds to gas, then that 0% LEL is worthless. Do a quick bump test to know if your sensors are working or not.
- Don’t use expired calibration gases. Calibration gases aren’t like milk. There’s no wiggle room with the expiration date. The expiration date on your calibration gas cylinders needs to be strictly followed. This is because calibration gas breaks down naturally on its own. This can make it impossible to perform a reliable calibration with it.
Where can I find calibration gas cylinders near me?
It’s estimated that 5.4 million U.S. businesses are powered by natural gas. No matter which industry you’re in, it’s important to make sure there aren’t any toxic or combustible substances in your workplace.
Calibration Gas is a calibration gas supplier that offers a variety of calibration gas cylinders and disposable calibration gas. To learn more about our calibration gas cylinders and environmental gas standards, contact Calibration Gas today.
Maritime safety is crucial to consider before and during your time on the waves. Your vessel needs to meet certain standards set by the government and international bodies to protect you, your crew, and your cargo.
To help keep your shipping vessel safe and secure on the water, here are some maritime safety tips.
Conduct a risk assessment
Every crew on every vessel needs to conduct a thorough risk assessment before going out on the water. If you’re traveling internationally, there are many areas that are considered safe. But there are also areas that are considered dangerous.
Some maritime security organizations specialize in a specific area such as the Maritime Security Centre: Horn of Africa and ReCAAP. These organizations can provide you with information on ships traveling in the area and provide real-time warnings of pirate activity.
Make sure your crew is doing their best to avoid illness
Hand washing isn’t just important in food service. It’s important everywhere you work, especially when you’re working in close quarters. With so many people in one place, diseases can spread quickly.
Whether or not there’s a disease warning on your shipping vessel, it’s crucial that you and your crew wash your hands regularly and take safety precautions. If you touch a handrail, elevator button, or place your hand on a surface in another common area, disinfect your hands soon after.
Keep gas detection equipment onboard
Depending on where you are on the water, your vessels will fall into different propulsion device categories which determine the regulations that apply to your engine. In the U.S., you might be affected by the:
- 1999 Marine Engine Rule
- 2002 Recreational Engine Rule
- 2003 Category 3 Engine Rule
- 2008 Category 1/2 Engine Rule
- 2009 Category 3 Engine Rule
Gas detection equipment is necessary to ensure your vessel meets current standards of emissions and specifications. It also ensures you’re meeting safety end environmental regulations, which require calibration gas and mandatory testing.
Where can I find a calibration gas supplier near me?
Approximately 25% of all primary energy used in the U.S. is natural gas. It’s important to make sure the gas you’re using stays in the right place and isn’t leaking or causing an issue to your health or anyone else’s.
Calibration Gas is a calibration gas supplier that meets environmental gas standards and supplies disposable cylinders. To learn more about calibration gas cylinders and our calibration gas accessories, contact Calibration Gas today.
Regulators are what you use to control the flow of your calibration gases from the gas cylinder to the meter. It’s important to use the right regulator to get the best performance from your gas meter.
The wrong regulator could not only cause inaccurate readings but also might be incompatible with your calibration cylinder altogether. How can you be sure to choose the right regulator?
One of the most important things you need to know about your calibration gas is the expiration date. Unlike food, which can taste odd or smell foul, your calibration gas will give you no signs that it’s gone bad.
So how do you know if your calibration gas has gone bad? And what happens if you use the gas when it has gone bad?